How to Jump-Start Your Car with a Portable Jump Starter?

Portable car batteries developed as a safer alternative, more convenient for traditional cables with clamps to start vehicles with dead batteries - and they do exactly that.

All battery boosters come with jumper clamps that attach to the auto battery terminals, and nearly all include reverse polarity protection. Some of these vehicle battery jump starters come with easily installed, semi-permanent attachments that allow you to quickly connect them to your car's starting electrics without the booster clamps.

Most have some sort of flash or area light and at least one USB port to charge electronics like phones and tablets. Those features are only the start.

so， How to Jump-Start your Car with a Portable Jump Starter?

Next, the editor will use the best jump starter brand Lokithor JA302 to illustrate the use of the Portable jump starter: There are two main methods of jump starter to start your car, Normal start and Forced start

1. Method one: Normal start

1.1. Connect the jump starter clamps with the EC8 connector to the jump starter.

1.2. Connect the red (+) clamp to the positive (+) terminal on the vehicle battery and the black (-) clamp to the negative (-) terminal on the vehicle battery, and make sure that the connections are good.

1.3. Press the "Lighfor "Power" button to power on the product. The green light on the screen will light up and flash if there are no issues. At this time, you'll be able to start your vehicle.

1.4. If the vehicle starts successfully, the jump starter will automatically disable the power output.

1.5. In most cases, the vehicle will be able to start immediately after the jump starter has been connected. Some vehicles may need to be connected to the jump starter for 30-120 seconds (the product will charge the car battery at this time) to continue the operation. If the vehicle does not start immediately. Please wait 20-30 seconds before each attempt. Do not attempt more than five times within 15minutes.

Please remove the jump-start clamps from the car battery instantly after you finished the starting. Press on the "Power" button for 2 seconds to shut down the jump starter. If there are no operations for 60 seconds, the product will automatically shut down.

2. Method two: Forced start

(Safety reminder: Under the forced start mode, part of the safety protection mechanism is invalid. Be sure to connect the positive and negative poles correctly, otherwise, it will cause a short-circuit. So please check the instruction manual before operation and use it with caution)

2.1. At this time, the normal start mode fails to start, e.g: the voltage of the car battery is very low (the voltage is less than 1V ), you can use the forced emergency start function after checking the operating specifications in the manual;

2.2. Connect the jump starter clamps to the EC8 connector on the Jump-Starter;

2.3. When the jump starter is on, tapping and holding on the 'BAR/PST button for 5 seconds will enter the forced start mode. At this time, the green light on the screen is always lighting, which means that the output of the ignition clips is normally turned on. At this time, you must prevent the positive and negative pales from being short-circuited; (In this mode, it is required to turn on the forced start function first, and then connect the ignition clips to the car battery, otherwise, the output cannot be turned on);

2.4. Connect the red (+) clamp to the positive (+) terminal on the vehicle battery and the black (-) clamp to the negative (-) terminal on the vehicle battery(during the connection process, there will be a slight sparking phenomenon, which is normal) and make sure that the connections are good; At this time, the overall voltage of the jump starter connected in parallel with the vehicle is displaying on the screen( then you can jump-starting the vehicle;

2.5. Shortly press the "Power" or, BAR/PSI" button to exit.

The above is the introduction of "How to Jump-Start your Car with a Portable Jump Starter" content, hope it can help you! Lokithor JA302 introduction page: lokithorshop.com/products/lokithor-ja302-12v-jump-starter-with-air-inflator

Recommended reading: The Best Guide to Clean and Remove Car Battery Corrosion